- TITLE:
USING OF MECHANOTRONICS DEVICES FOR WORKING MOVEMENTS WORKPIECЕS DURING WATERJET CUTTING
- AUTHOR(S):
V.N. Orel, V.T.Shchetinin, O.V.Fomovska, A.F. Salenko
- ABSTRACT:
Consider the use of mechatronic systems in the drive supply jetting equipment.It is shown that the creation of prestress due to such a drive in the cutting area significantly improves performance in jet cutting process to 25-35%.The optimum thickness of the blanks in which the use of pre-loading is energetically feasible.The dependence of the efficiency and the angle of the direction of the tangent to the stress created trajectory move ink jet head.
- TITLE:
REMOVAL OF THE DEFECTIVE LAYER AND STRESSES HUBS DURING MICROPROCESSING OF ROLLED THIN SHEET SPECIMENS OF METAL CELLULAR PANELS
- AUTHOR(S):
A.F. Salenko, V.Y. Kholodnyi, G.V. Gabuzian
- ABSTRACT:
t is shown the problems of the influence of the perforation method of an aluminum-magnesium foil on its strength characteristics. Discussed concept of the research stand. It is given the results of numerical and natural experiments. Received recommendatio ns of the selection of an optimum method for perforation manufacturing during processing of rolled thin sheet specimens of metal cellular panels.
- TITLE:
THE EFFECT OF FRICTION AND JOINTS RIGIDITY ON THE POWER CHARACTERISTICS OF ROTATING CHUCKS
- AUTHOR(S):
T. Al-Quraan, Y. Kuznetsov
- ABSTRACT:
Authors carry out the influence analysis of friction forces, joints contact rigidity and "clamping element-clamping object" and "clamping element-clamping chuck" subsystems’ rigidities proportion on the different clamping stages in the cases of non-rotating and rotating spindle, taking into account the centrifugal forces of unstable clamping elements. Recommendations on the improvement of clamping chucks power characteristics at high-speed treatment are given here.
- TITLE:
STUDY SCENARIOS FOR QUALITY OF SERVICE
- AUTHOR(S):
M. Slavov
- ABSTRACT:
This paper presents experimental results from study of typical scenarios for quality of service. The experiments show the imp act of the major parameters, which influence the quality of service - packets lost, round trip time, jitter and packets delay. The paper shows the required devices configurations as well as statistics for discarded packets.
- TITLE:
RESEARCH OF THE INFLUENCE OF PARAMETERS ON THE TELETRAFFIC MODEL OF VOICE SERVICES
- AUTHOR(S):
I. S. Balabanova, G. I. Georgiev
- ABSTRACT:
In Internet network data packets are transmitted to the series and breaks, and not permanently unlike some other types of networks. This is done to save network resources. Interactive services with data transmission usually requires duplex transmission, while access to databases requires simplex transmission. The traffic in these networks can be modeled as Poisson process interrupted or On-Off process. Interrupted Poisson flow is used to generate uneven traffic flow at imitative modeling and assessment Teletraffic models such calls are
generated by Poisson incoming flow at a constant intensity.
