VOLUME 67 (12/2023)
| TITLE | | PARAMETER SCREENING IN LONGITUDINAL TURNING OF C45E STEEL FOR SURFACE ROUGHNESS ANALYSIS |
| | AUTHOR(S) | | M. Trifunovic, M. Madic, P. Jankovic, M. Radovanovic |
| | ABSTRACT | | Parameter screening refers to the identification of the most important controllable factors with
respect to a given performance characteristic of a given system/process. In this study, PlackettBurman design was applied in order to identify the factors that significantly affect surface roughness
in longitudinal turning of C45E steel. The experiment involved realization of geometric PlackettBurman design with eight trials and two replicates. Six turning controllable factors were considered
in the design matrix (depth of cut, feed rate, cutting speed, insert nose radius, minor cutting edge
angle and cooling/lubrication condition) and were varied at two levels. Analysis of the obtained
results has shown that factors differently affect surface roughness and that their influences are in
accordance with known theoretical knowledge. It was also observed that three factors have
statistically significant impact on the machining quality, i.e., arithmetic surface roughness. These
results can be considered as the first step for further experimental investigation of significant factors
and their possible interactions effects. |
| | DOI | | doi.org/10.62853/FVOS5135 |
| | PAGES | | 57-61 |
| | DOWNLOAD | | PARAMETER SCREENING IN LONGITUDINAL TURNING OF C45E STEEL FOR SURFACE ROUGHNESS ANALYSIS |
| | How to cite this article: | | Trifunovic M., M. Madic, P. Jankovic, M. Radovanovic. Parameter screening in longitudinal turning of C45E steel for surface roughness analysis. Journal of the Technical University of Gabrovo. 67 (2023) 57-61. |
|
|
